Avolites Tiger Touch Operator's Manual Page 47

  • Download
  • Add to my manuals
  • Print
  • Page
    / 261
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 46
3. Patching - Page 47
TitanUniversal_Man_v8-0_TT.doc 05 August 2014
between page buttons and scrolling mode. You can change the fixture
page at any time.
You can allocate fixtures and dimmers to Groups, which allows you to
quickly select a set of fixtures with one button. Groups are described
in the next chapter.
Once you have patched fixtures or dimmers, the Patch View screen
shows you an overview of what is patched where and lets you edit
the patch. See section
3.2.1 on page 53.
3.1.2 Patching dimmers
Each fixture button can control single or multiple dimmer channels.
You allocate a button using the Patch menu (described below) or the
Patch View window (see section
3.2.1).
1> Press Patch (one of the white function buttons above the
numeric keypad, or on Tiger Touch mk1 the blue function
buttons bottom right), then [Dimmers].
2> [DMX Line=] shows you which of the DMX output lines you are
patching onto. Enter a new number to change the line. [Address
= ] shows the DMX address about to be patched. You can
change this by typing in the new address on the numeric
keypad and pressing Enter.
3> To patch a single dimmer, press a Fixture Select button. To
patch a sequence of dimmers each to its own button, press
[Quantity] and set the number of dimmers then press the first
select button. Alternatively, run your finger across the buttons
on the screen. The range of dimmers will be patched to
sequential DMX addresses.
4> The onscreen Select buttons turn dark blue and show fixture
details when they are patched.
5> Repeat from step 2 for other dimmers.
When setting the DMX address using [Address=], you can set
the DMX line (universe) as well by entering {line}.{DMX}, for
example 2.56 will set DMX address 56 on DMX line 2.
To see how DMX channels are patched, press
View (next to the
numeric keypad) then Patch to show the Patch View window.
[User Number = xx] allows you to set a user-defined number
for each dimmer or fixture patched, to help you identify them
Page view 46
1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 260 261

Comments to this Manuals

No comments