Avolites Tiger Touch Operator's Manual download pdf (Page 148)

Page 148 – 7. Cues

TitanUniversal_Man_v8-0_TT.doc 05 August 2014

When using with chases you need to press [Mask]

before pressing the Shutter button.

You can use Key Profiles to allocate one of the handle buttons to

release the playback.

7.6.2 Shape size/speed on fader

If the cue contains shapes, options B and C set how the shape

behaves when the playback fades in. You can set the size and/or

speed to be either fixed or to change with the fader.

You can also allocate a Speed Master to the cue which will allow you

to modify the shape during playback, see section

7.2.4 on page 135.

If you have a cue which contains only shapes to overlay

on other cues, set the cue to [Size on Fader] and

allocate a Speed Master. You can then create lots of

different looks out of the shape by varying the size and

speed at show time.

7.6.3 Curve

[Curve] defines how the attribute values will change when the

playback is faded in. The various curves are illustrated in section

12.5

on page

207.

7.6.4 Locking a playback onto a handle

This option allows you to lock the playback on a handle so that it

always appears on that handle no matter what page is selected. This

is useful if you have some general playbacks you want on every page,

without having to copy the playback onto each page.

If you select “Transparent Lock” then the playback will appear on the

current page only if no other playback is programmed in that

position.

7.6.5 Playback priority

This option allows you to configure how playbacks will behave if you

turn on two playbacks controlling the same fixture. The priority can

be set to Low, Normal, High or Very High. If a fixture is being

controlled by a playback and you turn on a playback of the same or

higher priority, then the new playback will take over. However, if the

new playback is set to lower priority than the first playback, the

fixture will not change.

This is useful if, for example, you’ve programmed looks using all your

fixtures, then you decide you want a couple of them to spotlight a

singer. If you set the Spotlight playback to be high priority, then

while it is active no other playback will affect the spotlight fixtures.

Priority is useful when using Swop buttons for strobe-

type effects where you want to black out everything

else. If you have a position shape running on other

fixtures, you don’t want that to stop during the Swop, or

it will look messy when you release the Swop button. So

set the shape playback to have a higher priority than

1 2 ... 143 144 145 146 147 148 149 150 151 152 153 ... 260 261

Comments to this Manuals

No comments

Avolites Tiger Touch Operator's Manual Page 148

Comments to this Manuals

Related products and manuals for Audio mixers Avolites Tiger Touch