Avolites Tiger Touch Operator's Manual Page 180

  • Download
  • Add to my manuals
  • Print
  • Page
    / 261
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 179
Page 180 – 10. Running the show
TitanUniversal_Man_v8-0_TT.doc 05 August 2014
When a group master is set to disabled or moved to a handle
without a fader, it will become locked at the current fader level.
Re-enable or move back to a fader to adjust the level.
You can release all masters by pressing Release then
[Release All Masters]. This can be useful if something is
being controlled by a master but you are not sure where
it is.
10.1.7 Flash and swop buttons
The Flash and Swop buttons on the playback faders may be used at
any time to flash and solo cues and chases. The Flash button adds
the playback into the current output, the Swop button turns off all
other output. . The Flash button can also be set to Flash With Times
which will use the pre-programmed timings of the cue when flashing.
You can reallocate the functions of the Flash and Swop/Select buttons
on the console using Key Profiles – see section
12.3.4 on page 204. A
useful alternative function is Preload which allows you to pre-position
the attributes of the fixtures before you raise the playback fader,
which is handy for avoiding unwanted movements (any fixtures which
are already active in another playback will not change when you use
Preload). You can also allocate Go and Stop buttons for cue lists and
chases. To quickly change the key profile, hold Avo Shift and press
[Edit Key Profile].
The screen relating to each playback
faders shows the allocated function of
the blue and grey buttons.
10.1.8 Playback priority
You can set playbacks to high priority if you do not want them to be
overridden by other playbacks using the same fixtures. For example,
if you have a couple of fixtures acting as a spotlight, but they are also
programmed into some colour washes, you probably want the
spotlight cue to take priority over the colour washes. See section
7.6.5 on page 148.
10.1.9 Preset playbacks
As well as the 10 playback faders across the bottom of the console,
there are 10 further playbacks on the top right of the console. These
are not affected by the playback page buttons and so are useful for
memories you use a lot, such as par can washes, basic stage
illumination or smoke machines.
Page view 179
1 2 ... 175 176 177 178 179 180 181 182 183 184 185 ... 260 261

Comments to this Manuals

No comments