Avolites Tiger Touch Operator's Manual download pdf (Page 164)

Page 164 – 9. Cue Lists

TitanUniversal_Man_v8-0_TT.doc 05 August 2014

9.2 Cue List playback

9.2.1 Running a cue list

Raise the fader of the cue list and press the Go button to run the first

cue. The bottom section of the display shows the cue list; the current

cue is highlighted in grey and the next cue has a box round it.

Also the display relating to the playback fader shows information

about the cue list, including the current and next cue, fade progress

of the current cue, and fade in/out times.

• The HTP levels of cues in the cue list are mastered by the fader

level.

• You can pause a fade by pressing the Stop button above the Go

button. Press Go again to resume the fade.

• You can skip to any cue in the cue list by selecting a “next” cue

using Wheel A, or using the left/right arrow keys. When you

press Go, the cue list will run that cue next.

• You can snap back to the previous cue by pressing the Snap

Back button

• You can jump directly to a cue by pressing the Connect button,

then typing in the desired cue number, then pressing Enter or

softkey A. Alternatively at the top level menu you can type the

cue number then press Connect.

• You can use Key Profiles to set the blue and grey buttons of the

playback to have various functions including Go, Stop, Connect,

Next Cue, Prev Cue, Cut Next Cue To Live, and Snap Back.

• When you lower the fader for a cue list, the HTP channels will

fade out, but the cue list will remain active. The section below

details how to kill the cue list.

• You can use timecode to play back a cue list automatically. See

section

9.5.5 on page 173.

9.2.2 Killing a cue list

Once a cue list is fired, it remains active until you kill it. You do this

by holding down the Avo Shift button and pressing the blue Select

button of the cue list’s handle.

1 2 ... 159 160 161 162 163 164 165 166 167 168 169 ... 260 261

No comments

Avolites Tiger Touch Operator's Manual Page 164