Avolites Tiger Touch Operator's Manual download pdf (Page 146)

Page 146 – 7. Cues

TitanUniversal_Man_v8-0_TT.doc 05 August 2014

3> Press [Fixture Order].

4> Set the sequence number to start from using option A.

5> If you want the sequence number to increase automatically, set

[Autoincrement] to On. If you want some fixtures to have the

same sequence number, set it to Off.

6> Touch the Select buttons of the fixture(s) you want to place in

that position in the sequence. The sequence number is shown in

the top right hand corner of the fixture select touch buttons.

7> Press Exit to finish.

• You can set several fixtures to have the same sequence

number. This means, for example, when used with Overlap they

will all do the same thing at the same time.

• You can remove a fixture from the sequence by turning off

[Autoincrement] and pressing the fixture button twice. The

fixture sequence will show X. Touch the button again to put it

back in the sequence.

7.5.3 Setting attribute fade times for a cue

You can set individual fade times for each attribute group (such as

Position). If you set a time, it overrides the normal times.

To set an attribute group fade time:

1> Press [Edit Times] at the top level menu.

2> Press the Swop button of the cue to be changed.

3> Press the Attribute Bank button (right hand side) for the

attribute you want to change.

4> Press [Delay] to set delay time or [Set fade] to set fade time.

5> Type the new time using the numeric keypad and press Enter to

save it, or press [Use Global] to delete the attribute times and

go back to the normal times.

6> Press Enter to save the changes.

You can take this even further and set individual fade times for each

fixture. When you select the cue to be changed, you will see that all

the fixtures in the cue are selected. To set attribute times for only

certain fixtures, change the fixture selection using the Swop buttons.

The Cue View window will display when editing cue timings to help

you see what you are editing. You can touch fixtures or attributes in

the grid to select which items are going to be edited.

Press the ALL button to select all fixtures in the cue.

1 2 ... 141 142 143 144 145 146 147 148 149 150 151 ... 260 261

No comments

Avolites Tiger Touch Operator's Manual Page 146