Avolites Tiger Touch Operator's Manual download pdf (Page 168)

Page 168 – 9. Cue Lists

TitanUniversal_Man_v8-0_TT.doc 05 August 2014

6> Press the white

↔

button to jump on to the next step.

• You can edit the times for a cue using the Live Time and Next

Time buttons as follows:

1> Fire the cue list by raising its fader.

2> Use Wheel A to select the cue number you want to change then

the white

↔

button above the Snap Back button to jump to it.

3> Press the Live Time button to set the times for the current step,

or the Next Time button for the next step. The Live and Next

step numbers are shown on the display above the controller

wheel.

4> Use the softkeys to set the times, linking and overlap settings

you want (see section

7.5.1 on page 143 for description of the

times). If you set the [Link to next step] option to On, then the

next cue will not wait for the Go button.

5> Press the white

↔

button to jump on to the next step.

• The Review button lets you test the live step with the new

timings.

• You can also use Unfold to set the times as described in the

Unfold section above.

9.3.7 Editing a cue list while recording

You can edit cues while you are in the Record Cue List menu.

1> Press [Cue Number=x] and type the cue number to be edited.

2> The console will jump to the cue and show the output.

3> Make the changes that you want to the programming of the

current step, or to the timings using [Edit Cue x Times].

4> Press [Update Cue x] to save the changes.

• You can’t change the cue number using this menu – if you press

[Cue Number] this will change the cue you are editing. Use

[Advanced Options] to change cue numbers.

9.3.8 Updating values in a range of cues

You can merge or replace values in a range of cues in a cuelist (or a

chase). This can be done either from the keypad or from the Playback

View.

From Playback View, press Record then select a cue or range of cues

by touching and dragging over the required cues. Select [Merge] or

[Replace] (or press Enter to merge). The current programmer will be

merged into all of the selected cues.

From the keypad, connect the cue list (or chase) and press Rec Step.

Then use the syntax <n> THRU <m> to select a range or <n> AND

<m> to select cues which aren’t together. The selected cues will

highlight in red in the Playback View if you have it open. When you

have selected all desired cues press Enter, then select [Merge] or

[Replace] (or just press Enter again to merge).

1 2 ... 163 164 165 166 167 168 169 170 171 172 173 ... 260 261

Comments to this Manuals

No comments

Avolites Tiger Touch Operator's Manual Page 168

Comments to this Manuals

Related products and manuals for Audio mixers Avolites Tiger Touch