Avolites Tiger Touch Operator's Manual download pdf (Page 185)

10. Running the show - Page 185

TitanUniversal_Man_v8-0_TT.doc 05 August 2014

10.5.1 Connecting remote trigger sources

To connect a MIDI source, connect it to the MIDI in connector on the

console.

DMX inputs are connected to one of the DMX output connectors using

a DMX male to male gender changer cable. (This is a simple plug to

plug cable with all pins wired straight through, i.e. 1-1, 2-2 and 3-3).

10.5.2 Setting up remote triggering

Enter System mode and select [Triggers]. The Triggers window will

open.

The left hand side of the window has a list of trigger sets. The “classic

Pearl” MIDI trigger implementation is provided as one of these. Each

set of triggers can be enabled or disabled using the button at the

right hand end of the mapping name.

1> Add a new mapping using the + button at the bottom of the left

hand column, and enter a name for it.

2> Add a trigger to the mapping using the + button in the right

hand column or softkey [Add trigger].

3> Select [Trigger Type] as [Hardware] to trigger a physical button

press or fader move, or [Item] to trigger a screen button

(playback, fixture, palette, group or macro).

4> Press the button or move the fader to be triggered. The screen

will update to show you what has been triggered. For Item

triggers you can select different actions using the [Action]

softkey.

5> Press [OK]. You have now set up the console action which is to

be triggered.

6> Now you need to set up the external stimulus which will cause

the trigger. Select [Trigger Type] as DMX or MIDI. For DMX,

press [DMX Port] to select which DMX port you are using for

DMX input. You will need to switch the DMX port to Rx mode

using the menu option provided.

7> Generate the stimulus from your device (for example play the

MIDI note, or turn on the DMX channel). If the [Learn] option is

1 2 ... 180 181 182 183 184 185 186 187 188 189 190 ... 260 261

No comments

Avolites Tiger Touch Operator's Manual Page 185