Avolites Tiger Touch Operator's Manual download pdf (Page 145)

7. Cues - Page 145

TitanUniversal_Man_v8-0_TT.doc 05 August 2014

7> Press Exit to get out of Edit Times mode.

• You can also set independent times for the IPCGBES attribute

groups, and for each individual attribute, see next section for

details of this.

• You can quickly set times from the keypad using the Time

button, e.g. TIME 5 AND 2 sets 5 sec fade in and 2 sec fade

out. (The Time button is the button previously labelled Set on

Titan Mobile and Sapphire Touch, and Next Time on Tiger Touch

and Pearl Expert).

The times you enter are affected by the cue mode which is set using

the [Fade Mode] option:

• Mode 0 – Channels will fade in as set by the fade time. The

Fade Out time is ignored. If times are set to zero, the HTP

channels fade in with the 0-100% position of the playback fader

and the LTP channels will snap.

• Mode 1 - Channels fade in as set by the fade time. HTP

channels fade out as set by the fade out times (LTP channels

remain as set in the cue). If times are set to zero, the HTP

levels will fade in and out with the fader and the LTP channels

will snap when the cue is fired.

• Mode 2 – Channels will fade in as set by the fade time. The

Fade Out time is ignored. However, the fade will stop when the

fader position is reached, so if the fader is set to 50%, the

attributes will stop half way to their programmed position. You

can reverse the fade back to the original position by moving the

fader back. If times are set to zero, both HTP and LTP channels

are controlled by the fader position.

In this mode LTP channels revert to their previous settings

when the cue is deactivated.

Mode 2 is useful when used with a pan/tilt cue for manually

tracking a spot across a stage or down a catwalk using the

fader position.

• Mode 3 - Crossfade cue. All channels, including intensity

channels, will fade to the settings in the new cue. All other cues

fade out and all other active playbacks become inactive; if you

need to re-fire a playback, take the fader to zero and put it up

again.

• If the cue includes shapes, then the shape will change with fade

times. The changes will be timed for a Mode 1 cue and

controlled by the fader position for a Mode 2 cue. This allows

you to create a shape which gets bigger or faster as you push

up the fader.

7.5.2 Changing fixture order

You can change the order of the fixtures stored in a cue. Normally

this is set to the order in which you selected the fixtures when the

cue was created, but you might want to change this (for example to

pair up fixtures so they move together when using Overlap).

1> Press [Edit Times] at the top level menu.

2> Press the Swop button of the cue to be changed.

1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 260 261

Comments to this Manuals

No comments

Avolites Tiger Touch Operator's Manual Page 145

Comments to this Manuals

Related products and manuals for Audio mixers Avolites Tiger Touch