Avolites Tiger Touch Operator's Manual download pdf (Page 44)

Page 44 – 2. Setting up and using the console

TitanUniversal_Man_v8-0_TT.doc 05 August 2014

We recommend that you have autosave enabled while

programming in case the power fails, but disable it while

running a show as it can cause the console to pause

slightly at inconvenient moments.

2.6.5 Backing up existing show files to USB pen drive

If you just want to save a copy of your current show, you can use the

normal save function to save it to the USB drive instead of the hard

drive.

To copy an existing show file on the hard disk to a USB drive, first

ensure your current show is saved, then use the Disk functions to

load the existing show from hard disk, then save it to the USB drive.

Alternatively you can use the Folders command on the Tools menu.

2.7 Clearing the console

When you start a new show on the Tiger Touch it is usually a good

idea to clear the console. All programming and patching is deleted,

but user options are not changed.

1> Press the Disk button.

2> Press [New Show].

3> Press [OK] to confirm.

4> Press Exit to leave Disk mode.

• When starting a new show you have the option to keep existing

DMX settings. This preserves the DMX/TitanNet configuration of

the console which determines how the XLR sockets on the back

of the console are used and how DMX is sent over the network.

• There is also an option [Wipe] in the System menu (when the

console is in System mode) which has the same function, and is

located in the same place as on the older “classic” Avolites

software.

2.8 Creating reports

When preparing a show it is often useful to create a report of how the

show is patched or programmed on the console, for example to give

to a crew when pre-rigging fixtures, or just for your records.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 260 261

No comments

Avolites Tiger Touch Operator's Manual Page 44