Avolites Tiger Touch Operator's Manual download pdf (Page 68)

Page 68 – 4. Controlling dimmers and fixtures

TitanUniversal_Man_v8-0_TT.doc 05 August 2014

programming in future and is currently used to clear values

added to the Titan Remote programmer.

The options in the “Clear Options” submenu are:

• [Auto Reset Mask] sets the mask to be automatically reset to

clear everything each time Clear is pressed, or you can toggle

the option to [Remember Mask] which will keep the mask

setting you used last time.

• [Leave/Zero Preset Fader Levels] is used to set whether latched

fixtures are cleared (the fixture key profile can be set to “Latch”

mode, which turns on the fixture dimmer channel when the

fixture button is touched. See section

12.2.1 on page 200.)

• [Freeze current values] sets what happens to LTP (non-

intensity) channels you have modified. If set to [Freeze Current

Values] the channels remain as you set them. If set to [Release

To Playback Values] the channels will go back to how they are

set in the current playback. For example: you have an active

playback making some lights green, then you select the lights

and change them to red. If you press Clear with this option set

to [Freeze] then the lights remain red. If the option is [Release]

the lights will go back to green.

• [Clear/Maintain Cue Times] - determines whether or not to

clear the cue time information from the programmer (this will

not affect fixture attribute times in the programmer).

You can use the Channel Grid window to selectively attributes from

fixtures. See section

4.2.1 on page 85.

4.1.4 Fixtures with multiple cells/subfixtures

If a fixture has multiple cells of control (for example an RGB LED

batten) and its personality supports it, you can select and control the

fixture either as a whole or as independent cells. This is particularly

useful when using Shapes or the Pixel Mapper.

If you select the fixture using the handle it is patched on, all cells of

the fixture will be controlled together.

You can use the buttons which appear at the top of the attribute

editor window to select the main fixture, or individual cells for control

(use the [Open Workspace Window] softkey to open the Attribute

Editor window).

You can also use Unfold to expand the cells onto individual select

buttons. In the Fixtures workspace, the current page of fixtures will

be replaced by select buttons for each individual fixture cell.

There are two ways to unfold fixture cells:

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 260 261

Comments to this Manuals

No comments

Avolites Tiger Touch Operator's Manual Page 68

Comments to this Manuals

Related products and manuals for Audio mixers Avolites Tiger Touch