Avolites Tiger Touch Operator's Manual download pdf (Page 170)

Page 170 – 9. Cue Lists

TitanUniversal_Man_v8-0_TT.doc 05 August 2014

buttons to the right of the Connect button also step through the

cues.

• You can select a range of cues, enabling you to alter the timings

of multiple cues all in one go, by using Wheel B, or in the

Playback View window, dragging across the cues you want to

select in the grid.

• To set the delay time between pressing Go and the cue starting,

press [Delay In] then type a time in seconds and press Enter.

• To set the fade in time of the cue, press [Fade In] then type a

time in seconds and press Enter. Both HTP and LTP channels

are affected by the fade.

• The fade out time of the cue is set by default to be the same as

the fade in time. You can change the fade out time by pressing

[Fade Out], then type the time in seconds and press Enter. To

set equal to Fade In time, delete the time and leave the box

blank.

The fade out time starts when the next cue fires, so if you set

the time to 1 second, the outgoing cue would start a 1 second

fade out as the new cue begins its fade in.

• The [Delay Out] setting of the cue would normally be used if

the console links automatically to the next cue, and sets a wait

time before the next cue starts its fade in. So the outgoing cue

would start to fade out, and the delay out time would run

before the new cue begins its fade in.

9.5.2 Cue linking & Link Offset

Cues in cue lists may be linked together, allowing you to build up

complex self-timed sequences. The link options are set using the

softkeys and are:

• [Link Wait For Go]: the cue waits for the Go button to be

pressed then fires immediately. Link Offset is disabled.

• [Link After Previous Cue]: The cue fires when the previous cue

has finished its delay in and fade in times. A Link Offset can be

set to add a delay between the previous cue finishing and this

cue firing. The offset can be given as a time in seconds, or as a

percentage of the fade time of the previous cue.

• [Link With Previous Cue]: The cue fires at the same time as the

previous cue fires. A Link Offset can be set to add a delay

between the previous cue firing and this cue firing, set either in

seconds or as a percentage of the fade time of the previous

cue.

1 2 ... 165 166 167 168 169 170 171 172 173 174 175 ... 260 261

No comments

Avolites Tiger Touch Operator's Manual Page 170