Avolites Tiger Touch Operator's Manual download pdf (Page 132)

Page 132 – 7. Cues

TitanUniversal_Man_v8-0_TT.doc 05 August 2014

fixtures is also stored, and is used with shapes and the Fixture

Overlap function. When you record a cue, the contents of the

Programmer are saved into the cue.

When you press Clear (by the numeric keypad), the programmer and

editor are emptied. This makes sure you don’t record fixtures you

don’t want. You also need to press Clear when you finish

programming, because any attributes in the programmer will override

playbacks.

Fixtures which are in the programmer are shown in mid blue on the

HUD windows and on the touch buttons. Attributes in the

programmer (the things you have changed) are shown in cyan on the

HUD windows and attribute displays.

Firing a cue does not place the values from the cue in the

programmer (although the Include function lets you do this, see

section

7.3.4 on page 138).

7.1.2 Creating a cue

1> Press Clear to clear the programmer. This ensures that you are

starting with a clean slate.

2> Set up the look using the fixtures. You can save shapes in a

cue. Remember that only fixtures which are selected or have

been modified will be saved in the cue (in Record by Fixture

mode).

3> Press the Record button.

4> Press the Swop button of an empty Playback to record the cue.

The handles where you can record the cue will flash. You can

also record a cue onto a touch button in the Playbacks window.

5> Press Clear to clear the programmer. Repeat from 2 to program

more cues.

Other useful things to know about recording cues:

• Cues can be recorded into the playback faders, the 10 fixed

playback faders on the top right and the onscreen Playbacks

window.

• [Record Mode] lets you select Record By Fixture (all attributes

of any modified or selected fixture are saved), Record By

Channel (only modified attributes are saved), Record Stage (all

fixtures with a non-zero dimmer channel are saved) or Quick

Build (see next section).

• Record By Channel is useful if you want to layer multiple cues

to create an effect.

• If you are recording a lot of cues, you can press the Menu Latch

button to keep the Record Cue menu active. Press Exit to leave

Record Cue mode.

• The touch screen immediately above each fader shows a legend

for the playback. To set this, press [Set Legend], then the

playback Swop button (or the touch select button), then enter a

legend on the keyboard. Press Enter to store it.

1 2 ... 127 128 129 130 131 132 133 134 135 136 137 ... 260 261

Comments to this Manuals

No comments

Avolites Tiger Touch Operator's Manual Page 132

Comments to this Manuals

Related products and manuals for Audio mixers Avolites Tiger Touch