Avolites Tiger Touch Operator's Manual Page 91

  • Download
  • Add to my manuals
  • Print
  • Page
    / 256
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 90
5. Palettes - Page 91
TitanUniversal_Man_v7-0_TT.doc 03 September 2013
Palette fading can be very useful when recalling a palette live
during a show, as you can smoothly move fixtures to a new
position or change colour slowly (on colour mixing fixtures).
Palettes applied with a fade time do not get put into the
programmer, so will not be saved in any cues; don’t use fade
times when programming. This is to ensure that when used in a
live situation, the next cue will override the palette and play
back as intended.
5.5.3 Manual fixture overlap when recalling palettes
You can set a Fixture Overlap when recalling a palette, which means
that the palette will be applied in sequence to each fixture in the
group. This is a very quick way to busk some amazing effects. Fixture
Overlap=100% means that all fixtures will change together. Fixture
Overlap=0% means that each fixture must complete its fade before
the next will start its fade.
1> Type in the overlap time for the palette on the numeric keypad.
2> Press [Set Overlap].
3> Type in the fade time if fade is also required.
4> Press a palette button to recall the palette.
You have to re-enter the overlap each time you recall a palette.
To use the same overlap every time, set a Master Overlap:
Press Palette, [Master Overlap]. To disable Master Overlap set
to 100%.
5.5.4 Master Time for palettes
Option [Master Time] on the Palette menu (press the grey Palette
button above the numeric keypad) allows you to set a default fade
time. This fade time will be used for all palettes unless you manually
type in a different time. This can be useful when “busking” a show
with palettes.
The [Master Overlap] option similarly sets the default Overlap for
palette recall.
You can create macro buttons to set different palette
fade times. Press Macro, Record, press a button to store
your macro on. Then press Palette, [Master Time], 3
(for 3 sec), Exit, Macro.
Repeat these steps to create a Palette Snap button (0
sec), or a 1 sec fade button, and so on.
Page view 90
1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 255 256

Comments to this Manuals

No comments