Avolites Tiger Touch Operator's Manual download pdf (Page 184)

Page 184 – 11. Remote control

TitanUniversal_Man_v7-0_TT.doc 03 September 2013

the internet rather than between the remote and the console. If

the remote does not work properly, disconnect your router from

the network.

11.1.1 Using an existing network

If you are connecting to an existing network, DHCP will probably be

enabled which will automatically set suitable IP addresses on the

console and mobile device. All you should need to do is to plug the

console’s Ethernet connection into the network.

If the console is set to have a fixed IP address you will need to

manually set a suitable IP address for the network – consult the

person who manages the network.

11.1.2 Network setup using a dedicated access point

This is a basic setup assuming that the console is connected directly

to an access point. For information on setting up your Wireless Access

Point please refer to the documentation provided with it.

• We advise using a proper wireless access point rather than a

wireless router (ADSL router). Although routers are cheaper,

the WiFi connection through to the Ethernet is often slower.

You need to set up the network settings on the Wireless Access Point,

the mobile device and the console so that they can communicate with

each other. In this example we use an Android smartphone but other

devices are similar.

1> In the access point’s admin screen, give the access point an IP

address such as 10.0.0.1, make sure wireless is switched on

and enable the DHCP server. Take note of the name of the

wireless network (SSID).

2> Connect an Ethernet cable from the back of the console to the

access point.

3> Set the IP address of the console: Switch to System, select

[Network Settings], press [Local Area Connection], then press

[Set IP 10.*.*.*].

4> On the mobile device, go to WiFi settings or Network Settings

and ensure Wi-Fi is set to on.

5> Select the wireless network from the list, the name you took

note of earlier. The mobile device should automatically get an

IP address from the access point.

6> Run the Titan Remote app. You should see the console listed.

11.2 Operating the remote

To connect to the console, open the Titan Remote app and a list of

available consoles will be shown - hopefully if you have done the

network setup correctly, you will see your console listed.

There is also a local emulator which can be used to test or

demonstrate the remote when no real console is connected.

Choose what you want to control using the row of buttons across the

middle of the app. The Keypad button enables or disables the numeric

1 2 ... 179 180 181 182 183 184 185 186 187 188 189 ... 255 256

Comments to this Manuals

No comments

Avolites Tiger Touch Operator's Manual Page 184

Comments to this Manuals

Related products and manuals for Audio mixers Avolites Tiger Touch