Avolites Tiger Touch Operator's Manual download pdf (Page 134)

Page 134 – 7. Cues

TitanUniversal_Man_v7-0_TT.doc 03 September 2013

For example, suppose you recorded a cue which had scans at a

certain position, with the colour set to green. If you later decide that

you don’t want a colour recorded at all in the cue, so that the colour

set by previous playbacks will remain, you set the colour values to Off

in the programmer, which when saved will remove those values from

the cue. You can also use the Off function to remove complete

fixtures from a cue by selecting all the attributes.

Setting an attribute to Off is not the same as recording an attribute at

zero, since this would change the attribute when the cue was fired. It

is the same as excluding that attribute using the mask when

recording, so the attribute will remain unchanged when the cue is

fired.

1> Press Off followed by the playback to be changed. (On consoles

which do not have a Release button, you need to press Off,

then [Off Console Values], then the playback)

2> Select fixtures to be set to Off.

3> Set the attribute mask to determine which attributes will be set

to Off.

4> Press the [Off] softkey.

You can also use Include to set values to Off.

1> Use the Quick Include function (described in previous section)

to load the cue you want to change into the programmer.

2> Press the Off button to display the Off menu.

3> All fixtures in the cue will be selected. If you don’t want to

change them all, deselect the fixtures you don’t want.

4> Use the softkeys to select which Attributes you want to remove.

5> Press Record Cue, then set the record mode to [Replace], and

press the Swop button of the cue to update it.

• You can merge “Off” attributes into a cue without including it

first.

• You can also remove attributes from palettes using the Off

function.

• Another way to remove attributes is from the Cue View window.

See section

7.3.3 on the previous page.

• Attributes set to Off can be restored to their previous value

using the On function. Set the attribute to On and merge it into

the cue.

7.4 Copying, moving, linking and deleting

7.4.1 Copying or moving a cue

Using the Copy/Move/Link button you can make a copy of an existing

cue, move it to a new playback, or create a new playback which is

linked to the existing playback. You can copy, move or link multiple

playbacks (which may be cues, chases or cue lists) in one operation.

Move is useful for tidying up the console. Linked cues are handy if

you want a cue to appear on more than one page for ease of

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 255 256

Comments to this Manuals

No comments

Avolites Tiger Touch Operator's Manual Page 134

Comments to this Manuals

Related products and manuals for Audio mixers Avolites Tiger Touch