Avolites Tiger Touch Operator's Manual download pdf (Page 64)

Page 64 – 4. Controlling dimmers and fixtures

TitanUniversal_Man_v7-0_TT.doc 03 September 2013

You can also select attributes by touching the IPCGBES buttons on

the touch screen, and modify them using the Attributes workspace

window; this is described in the next section.

Each attribute button controls several attributes, one on each wheel.

1> With some fixtures selected, press the button for the attribute

to be changed

2> Turn the wheels to set the attribute. The display above the

wheels shows which attributes are being controlled, and the

settings which are available scroll up and down as you turn the

wheels.

You can also touch the roller image on the screen to change

the attributes up or down by one. For continuously variable

controls like a dimmer, touching the roller will set the attribute

to full or zero.

3> Repeat from 1 to change other attributes of the selected

fixtures.

Some other things to know about attributes:

• If an attribute is in the programmer, it is highlighted (as shown

with the “Green” setting in the screen picture above). This

provides a quick way to see which attributes are in the

programmer.

• You can also select the attribute to be changed from the

softkeys by pressing the “Attribute Options” button.

• If the display above the wheels does not show the attribute

when you press the button, that attribute is not available on the

selected fixtures.

• If the wheel display shows a small arrow next to the legends,

this means that there are further attributes to control. Press the

Attribute button again to toggle through the attributes.

Attribute bank buttons

Wheels

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 255 256

No comments

Avolites Tiger Touch Operator's Manual Page 64