Avolites Tiger Touch Operator's Manual download pdf (Page 136)

Page 136 – 7. Cues

TitanUniversal_Man_v7-0_TT.doc 03 September 2013

pictures show what happens to the LTP channels when fixture overlap

and attribute fade are used.

All times which you have set while programming the fixtures/dimmers

will be recorded when you save the cue.

You can also edit times of a cue you have already saved like this:

1> Press [Edit Times] at the top level menu.

2> Press the Swop button of the cue.

3> Press [Fade Mode x] to set the cue mode. This sets how the

times are used, see below.

4> Press [Delay time] to set the delay before the cue starts, [Fade

time] to set the fade-in time of the cue, and [Fade out time] to

set the fade-out time of the cue.

5> Type the new time (in seconds) using the numeric keypad and

press Enter to save it.

6> Press [Fixture Overlap] to change the overlap, then enter 0-100

on the keypad. 100% means all fixtures fade together. 0%

means that the first fixture will finish its fade before the next

one starts. 50% means that the 2

fixture will start fading

when the first one is half way through its fade. The order of the

1 2 ... 131 132 133 134 135 136 137 138 139 140 141 ... 255 256

No comments

Avolites Tiger Touch Operator's Manual Page 136