Avolites Titan One User Manual download pdf (Page 48)

Page 48 – 3. Patching

TitanUniversal_Man_v7-0_TM.doc 02 September 2013

1> Press Patch (if you’re not already in Patch mode).

2> Press [Repatch Fixtures].

3> Press the Select button of the fixture you want to change.

4> To change DMX press [Address], type the new address and

press enter. If this address is already in use, a warning icon will

be shown.

5> To change the DMX output line, press [DMX Line=x] and enter

a new output line number 1-12.

6> Press Enter or [Repatch] to confirm the change.

7> Repeat from step 3 if you want to change other fixtures.

• You can “Park” the fixture using [Park]. This removes the

fixture from the DMX output map, but all programming is

retained.

• If the new DMX address already has another fixture or dimmer

patched on it, the console will warn you (unless this is disabled

in User Options, see section

12.3.3 on page 191). You can

either press [Select another DMX address] to abort the change

or [Park Conflicting Fixtures]. All programming for the parked

fixture is preserved, but you need to repatch it to a free DMX

address using the above procedure before you can use it again.

If you press [Always Park Conflicting Fixtures] the console will

park this and any future conflicting fixtures without warning you

(you can change this option back in the User Settings).

3.2.4 Setting legends

You can set a legend for each fixture or dimmer you’ve patched which

is displayed in the Fixture Select touch button. This can be really

useful to help you identify the fixture.

1> At the main menu press [Set Legend].

2> Press the Select button for the fixture you want to legend.

3> Type the legend on the keyboard.

4> Press Enter when you have finished.

• You can also choose to have a picture legend using the softkey

options.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 250 251

No comments

Avolites Titan One User Manual Page 48