Avolites Titan One User Manual download pdf (Page 142)

Page 142 – 8. Chases

TitanUniversal_Man_v7-0_TM.doc 02 September 2013

• You can set a legend for the chase by pressing Set Legend,

then pressing the Swop button for the chase and entering the

legend, as with cues.

• There is no limit to the number of steps in a chase.

8.1.2 Creating a chase with Quick Build

Quick Build mode, as the name suggests, allows you to build a chase

very quickly from existing palettes and playbacks.

Start recording a chase as described in the previous section, set

[Record Mode] to Quick Build.

Select any palette or playback to insert that item as a step in the

chase. If you select multiple palettes by selecting a range of buttons,

each palette will be added as a separate step.

To insert specific fixtures from a palette or playback, select the

fixtures first and then select the palette or playback.

8.2 Playback

8.2.1 Playing back a chase

To fire a chase, raise the fader of the playback. (You can also use the

Flash/Swop buttons). The chase will start to run. The bottom line of

the screen relating to the playback fader shows the current cue

number and speed of the chase.

• The HTP (intensity) channels in the chase will be controlled by

the fader; if fade times are programmed, the fade will stop at

the fader level. The other channels (LTP) will be set as soon as

the fader moves above zero according to the fade times

programmed in the chase. You can set the point at which the

LTP channels activate from the User settings menu.

• While the chase is running, the area of the screen above the

wheels shows details of the chase steps.

• You can temporarily pause the chase by pressing the Stop

button near the wheels. Press Go to resume playback.

There are many options you can set to determine the way the chase

runs and these are described in the rest of this chapter.

1 2 ... 137 138 139 140 141 142 143 144 145 146 147 ... 250 251

No comments

Avolites Titan One User Manual Page 142